It may be hot, but down in the bowels of New York’s Pennsylvania Station it’s not really hell. Befitting the city’s well-known nickname, nobody here is sleeping at 2 AM – the renewal of Penn Station is a round-the-clock job. On the night of July 21st anticipation has been steadily building for the final placement of one of the many puzzle pieces of the station’s new track infrastructure. Switch 69B – everything is named numerically based on it’s position, with letters indicating the facing direction – is a massive piece of hardware that was assembled outside the station. In the cover of darkness it will be rolled in on its side, due to its width – when laid flat it is wide enough to foul the tracks on both sides.
With the last Amtrak train in the house at 1:40 AM, there’s a brief lull until the first morning departure at 3:25 AM. It’s in this window that the switch is laid flat just beyond the mouth of the Hudson tunnels and loaded onto Amtrak’s Portal Krane-1, which will bring the heavy piece to the correct spot and lower it into position on the already prepared track bed. PK-1, as it is abbreviated, is a Transformers-looking beast, with movable legs that allow it to “walk” the switch into position. It’s controlled by a complicated looking panel mounted to the body of the operator – I can only think of it as a joystick on steroids, and idly wonder if the fellow is any good at video games.
The night’s anticipation reaches its peak as PK-1, fully loaded, begins moving at 2:23 in the morning. When the vehicle reaches the right position next to the empty track bed, the operator controls PK-1’s legs to gradually shift the position of the switch. After several lateral shifting motions, the switch hovers in the appropriate spot just above the track bed. After trimming pieces of the already laid rail to accommodate it, the switch is finally lowered into position.