Decay and Rebirth: the Glenwood Power Station

Anyone familiar with the history of Grand Central Terminal (and hopefully all of you that regularly read this blog) likely recall a 1902 train crash that led to significant changes in how New Yorkers viewed trains. Nobody really liked steam trains operating through the city, and attempts to hide them in cuts and tunnels proved to be unsafe. That particularly serious crash in the Park Avenue Tunnel led to steam trains being banned in Manhattan. The idea of electric trains had been pondered for a while, but this proved the necessary impetus for innovation. The New York Central’s Chief Engineer William Wilgus, and inventor Frank Sprague came up with the bottom contact third rail to power trains into the city, allowing a bold new Grand Central that could never have been accomplished with the previous technology. The often overlooked question, however, is where did that electricity come from? Let’s rewind back a few years to the beginning of the Grand Central project…

At the heart of the Grand Central Project was not just a station, but an entire set of buildings – A Terminal City. Minnesota architects Charles Reed and Allen Stem won the New York Central’s commission for designing the new Grand Central Terminal, with the assistance of Reed’s brother-in-law, William Wilgus. Later added to the project by the Vanderbilt family were cousin Whitney Warren and his partner Charles Wetmore. The four collaborated on the Terminal itself, as well as the redesigned Grand Central Palace. Other buildings associated with the project were divided between the two firms – the hotels and New York Central Building went to Warren and Wetmore. Though not the most important architecturally, the two most important buildings of all were designed by Reed & Stem – the power stations that powered these new electric trains.

1905 sketches of the New York power stations
1905 sketches of the Yonkers (Glenwood) Power station (left) and Port Morris power station (right).

Two power stations were constructed by the New York Central in 1906 – one on the Harlem Division at Port Morris (the Harlem had a short branch to Port Morris at the time), and another in the Glenwood section of Yonkers on the Hudson Division. The architecture of both, as designed by Reed and Stem, was relatively simple with brick and terra cotta on the outside. Long, arched windows provided natural light during the day, and an attractive glow along the water at night. Under that simple exterior lay an extensive framework of steel (2800 tons of steel in total), with concrete flooring, brick and tile walls, and concrete roofing slabs covered with copper. Each plant consisted of two buildings – a main building that enclosed a boiler room, coal bunker, and generating room which was 167′ wide, 237′ long, and 105′ high, and a separate swich house located about 40′ away from the main building.

Port Morris Power Station Typical substation
The Glenwood Power Station
1905 plans for the Yonkers and Port Morris power stations, as well as a typical substation.

Both power stations were cross-connected, and each had an ultimate capacity of 30,000 kw. Just as Grand Central was designed to handle more traffic than the railroad was currently operating, the power stations were designed to carry train service much greater than what was being operated at the time with steam locomotives. Powered by coal, the plants were both designed to receive coal by rail or by boat, which was then delivered by conveyors to a crusher. After the coal was crushed to the necessary size, it was delivered by another conveyor to a coal bunker with a 3500 ton capacity at the top of the building. Each plant had 24 Babcock and Wilcox water tube boilers, and was designed to accommodate 6 5000kw Curtis vertical turbo-generators. The high voltage AC electricity provided by these power plants was delivered to various substations along the Harlem and Hudson Divisions through insulated cables, where it was then converted to lower voltage DC power for the third rail to power trains.

 
 
  
   
  
   
    
  
   
  
   
 
  
The power station today, after being abandoned for decades.

Though integral to the initial operations of Grand Central Terminal, the New York Central eventually realized that it would be cheaper to purchase energy as opposed to generating its own, and the Glenwood plant was sold to Con Edison in 1936. By the late ’60s the obsolete plant was shuttered and remained abandoned for decades… until fairly recently. A bold plan to restore and repurpose the old power station has been on the table for a few years, but seems to be moving forward thanks to the assistance of New York politicians.

Rendering of the redeveloped power station
Rendering of how the redeveloped power station would look.

“The Plant” project looks to turn the crumbling power station into a hotel and a convention center, with a capacity of 1600 and 3500 people, respectively. The space is separated into four distinct parts – the Smokestack Building, the Great Turbine Hall, a courtyard, and the Switch House Building – all of which will be connected internally with a new corridor. The smokestack building would contain a reception area, and cafe on the ground floor, and a hotel on the upper floors. Not only will the smokestacks be preserved, plans call for meeting rooms to be constructed inside the 15’6″-diameter stacks.

Plan for restoration
Compare the original plans above with the plans for the future…

A large convention center and exhibition space is planned for the Great Turbine Hall, upper floors may contain retail shops, and the building may also include a spa. The last building to be converted, the Switch House Building, will be converted into a corporate retreat with a hotel, ballroom, restaurant and cafe. This building would see the most changes from the original, as two stories would be added to the building for additional hotel space. The last section of the project would be the Courtyard, currently an open space between the buildings. This open air area would be enclosed with a glass roof and would contain a restaurant or cafe, and a seasonal garden.

All of the aforementioned buildings would be connected to the Metro-North station at Glenwood via a new pedestrian bridge over the railroad tracks.

Plan for development
Plans for development around the old Glenwood power station

While there will always be people opposed to development in their neighborhood, the plans for restoring and repurposing the old power station were generally well received. Unfortunately, the area surrounding the site contains no space for parking, and project planners had their eyes on portions of nearby Trevor Park to fit that need, which was not well received by locals. Original plans called for a partially underground parking structure under the current Trevor Park, with artificial turf ball fields to be constructed above. After comments from the public, alternate possibilities have been suggested.

Alternate development site plan
Alternate plan for development around the old Glenwood power station

Either way, the city council unanimously decided at the end of April to request the New York State Legislature to authorize construction on former park lands for the project to move forward. The one caveat being that all parkland being used by the project must be replaced and improved in equal or greater acreage in alternate spots. This alternate parkland would be closer to the waterfront, and the development plans calls for sand volleyball courts, a bocce court, and a picnic and grilling area. This area would be in addition to the previously mentioned park above the parking garage, which is planned to have three ball fields and a playground.


Video highlighting the restoration and repurposing of the Glenwood Power Station.

I, for one, am very eager to see this beautiful old structure again restored to greatness. Though frequently overlooked, the old power plant played an integral role not only in local rail history, but also in the growth of New York City and its suburbs in Westchester and beyond. It will certainly be interesting watch how this project progresses!

Read More

Tuesday Tour of the Hudson Line: Glenwood

I have a secret confession to make… the Hudson Line sure is attractive, but in my opinion, one of the most beautiful spots is probably not on most people’s list. I absolutely adore Glenwood. I do have a bizarre infatuation with abandoned buildings, though – and the old Glenwood power station is quite gorgeous to me. While we’re technically checking out Glenwood’s train station today, the abandoned power station is impossible to miss. It also has a shared history with the railroad, at least in the distant past, which does make it a relevant part of today’s tour.


Inside the power station. Despite my professed love for the abandoned Glenwood power station, I’m too much of a law-abiding chicken to try and enter the place. Thankfully, many other people have, and it is pretty easy to find photos online. Photo by Chris M. Howard.

As you may remember, in 1902 there was a serious train crash in the Park Avenue Tunnel, which was one of the catalysts for third-rail electrification heading into New York City. The railroad, of course, needed somewhere to get the electricity from – and built two power generating stations – here in Glenwood, and another one in Port Morris.

Completed in 1906, the Glenwood power station provided high voltage electricity to various substations located along the Harlem and Hudson divisions. These substations converted the electricity to what was needed to power the third rail for the trains. The New York Central used the power station for 30 years, before selling it to Con Edison in 1936. It was ultimately shut down in the 1960′s, and for many years sat vacant.


Glenwood Power Station – reimagined.

Over the many years that the the power station has sat idle, there have been various proposals to convert it to other uses. Some of those proposals are downright strange – like the one above. Designed by architect Will Alsop, he reimagined the power station as a new home to a contemporary art museum, with residential apartments located above. As you will see from my photos below, work is currently being done on the old building, thankfully not using the design above. According to The New York Times, $200 million has been set aside for the restoration and redevelopment, “to be used for conventions, exhibitions and public events, among other things.”



CSX at Glenwood in 2009 – the former power station visible in both. Photos by Michael Foley.

As for the Metro-North station itself, Glenwood is about 16 miles north of Grand Central, situated in the city of Yonkers. The station consists of two side platforms, connected by an overpass. Above the platforms and on the same level as the overpass there is an old brick station building which is fairly attractive – minus the chain and padlock on the doors.

All of the platform station signs mention the Hudson River Museum, which is within walking distance of the station, and worth checking out. Perhaps not too far in the future, with the redevelopment at the old power station, there will be more attractions at Glenwood. If residential apartments were a part of that plan, it would be the perfect home for a commuter – within walking distance of Glenwood station, all with lovely views of the Hudson River.

 
  
  
   
  
  
  
 
   
  
 
  
 
  

Read More